Hydraulic Pipe Bender

Item No.: 106
1)It is suit for common water pipe,wire pipe,carbon steel pipe,thick-wall conduit tube,bend the angle with 90º.
2)1/2"-2" can be shaped 90°one time,2 1/2"-4" can reach suitable radian which radian must remove pipe and bend pipe five times.
INQUIRY
Description
Introduction

The pipe bender is suit for bending welding steel tube which has low pressure to deliver liquid in cold situation. It is also suit for bending common water pipe; carbon steel pipe and thick-wall conduit tube. It is not suit for bending the steel pipe with different diameter and colored metal pipe. The machine can be use in building, Petrol, mines and shipbuilding industry.




Working Method
  1. Turn the switch tightly with clockwise direction.
  2. Loosen the bolt.
  3. Add lubrication on mould and the pipe.
  4. Choosing corresponding mould base on size of pipe, set mould on the top of actuating rod. Then insert the rocker on nether molding board. Put the pipe, turn two rockers and make the groove point to the mould.
  5. Turn back the upper mounding board; shake the handle of pump to make the mould press the pipe, bending the pipe until the angle is shaped.
  6. After bending. Loosen the switch anti-clockwise. The actuating rod would be back automatically. Open the upper molding board, get out the pipe.
Item no. power(ton) Travel(mm) Working Range Moulk disposition Thickness of pipe(mm) Weight(kg)
SWG-1 10   170 1/4“-1” 1/4" 5/16" 3/8" 1/2" 3/4"
1"
1-3.5 20 20
SWG-2 16 250 1/2“-2” 1/2”、3/4”、1”、1/2”、2” 2.75-4.5 50
SWG-3 18 320 1/2-3” 1/2”、3/4”、1”、1/2”、2”、2/2 1/2”、3” 2.75-4.5 100
SWG-4 20 415 1/2-4” 1/2”、3/4”、1”、1/2”、2”、2/2 1/2”、3”、4” 2.75-6 143



ITEM NO:SWG-1

•Output:10T
•Stroke:170mm
•Bending range:1/4"-1"
•Thickness of pipe:1-3.5mm
•Outside Dia:Ø13mm-Ø34mm
•Mould Disposition:1/4",5/16",3/8",1/2",3/4",1"




ITEM NO:SWG-2
•Output:16T
•Stroke:240mm
•Bending range:1/2"-2"
•Thickness of pipe:2.75-4.5mm
•Outside Dia:Ø22mm-Ø60mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2"




ITEM NO:SWG-3

•Output:18T
•Stroke:320mm
•Bending range:1/2"-3"
•Thickness of pipe:2.75-4.5mm
•Outside Dia:Ø22mm-Ø89mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2",2 1/2",3"




ITEM NO:SWG-4

•Output:20T
•Stroke:415mm
•Bending range:1/2"-4"
•Thickness of pipe:2.75-6mm
•Outside Dia:Ø22mm-Ø108mm
•Mould Disposition:1/2",3/4",1",1 1/4",1 1/2",2",2 1/2",3",4"


Details


 
RELATED PRODUCTS
Digital Tread Depth Gauge
1. Range:0-25.4mm 2. Resolution:0.01mm
Read more
Air tire inflator with gauge
Easy to read gauge: 20 to 120PSI Air inlet size: ...
Read more
Low profile design 4 ton floor jack
Weight capacity of garage jack: 4 tons Low profil...
Read more
REVIEW